The supplied guide takes you through the setup step by step. You manage product images, names, prices and stock levels directly on the touchscreen.
Day-to-day operation stays simple. You change individual products directly; several items can be managed together.
Indoors, level and load-bearing, 20 cm clearance all around, no direct sunlight or heat source. Anchor it to the floor before commissioning. Important after transport: let it stand for at least 30 minutes, and for 4 to 5 hours before running the cooling. Only then switch on.
Set the cooling mode and target temperature, activate the anti-fog heating of the glass door, and set the language and currency to match your payment modules. Then change the factory password.
Assign compartments and add names, descriptions and your own images. When filling, work from front to back and rotate older stock forwards. Conveyor limits apply: no more than 1,6 kg per belt, 2,5 kg with two belts, and no more than 7 products.
Manage prices and stock levels per compartment or in bulk directly on the touch display. Make sure the products fit the chosen spiral and do not stick out over the tray, so that they drop cleanly into the delivery chute.
Enable cash, fill the coin changer with change and activate the denominations of the banknote reader. Connect the card terminal according to the manufacturer’s documentation; an active contract with the payment service provider is required for this. After every installation or change of payment peripherals, restart the machine and then carry out a full test purchase.
Internal temperature within the target range, delivery compartment clear and no products stuck in the spirals, payment terminal online, enough change available.
You can adjust the most important product data directly on the machine.
The guide also takes you through the final function check.
You receive a compact getting-started guide plus the model-specific operating instructions and quick guide. Setup, daily care and the most important checks are thus clearly documented.
Yes. Product name, price, stock and other product data can be changed directly in the machine’s product management.
Yes. Your own images can be transferred to the machine and then assigned to the appropriate product compartment.
No. Individual compartments can be edited separately; several items or entire shelves can also be updated together.
Check product name, image, price and stock, and test dispensing as well as every activated payment method.
Every machine comes with a clear process for setup and daily operation.
View vending machines